New in version 1.50:
secure-image:
      ▪ Added hybrid_plugin_signer_example.py, a new example plugin signer demonstrating hybrid signing with both ML-DSA-65 and ECDSA certificate chains. The example supports a 2-level ML-DSA-65 chain and a 3-level ECDSA chain, with both roots always included for hybrid signing compatibility.
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
metabuild-secure-image:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
fuse-blower:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
secure-debug:
      ▪ Added support for Debug Policy format V9, where the full set of supported debug flags is now dictated entirely by the Security Profile XML.
      ▪ The --inspect operation now accepts --security-profile to display descriptive flag names when inspecting a V9 Debug Policy image.
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
tme-secure-debug:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
elf-tool:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
elf-consolidator:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
mbn-tool:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
fuse-validator:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.
tme-command:
      ▪ The security sandbox has been temporarily disabled and will be re-enabled in a future release.

New in version 1.49:
secure-image:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Added support for new --remove-hash-table-segment operation which enables removal of the Hash Table Segment from an ELF image.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation. The sandbox is automatically bypassed when using --signing-mode PLUGIN or --encryption-mode PLUGIN.
      ▪ Added support for a new encrypt_image_data() plugin encrypter API that accepts the wrapped Data Encryption Key as a parameter, enabling usage of an ephemeral Data Encryption Key that never leaves a trusted environment such as an HSM. qbec_plugin_encrypter_example_new_encrypt_image_data.py demonstrates usage of the API.
      ▪ Fixed a bug that caused --hybrid-sign to fail silently when QTI re-signed an image, by ensuring hybrid padding is always reserved when the Security Profile supports it.
      ▪ Improved the error message displayed when OEM Metadata fields in an existing image differ from those provided during --hybrid-sign. The updated message now identifies specific differing fields by name along with their incoming and existing values.
      ▪ Fixed a bug that incorrectly mandated --certificate-chain-depth in certain signing scenarios involving --mixed-root-certificates.
      ▪ Fixed a bug that allowed --hybrid-sign to be performed on an image that had not been previously OEM signed.
metabuild-secure-image:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Added support for new --remove-hash-table-segment operation which enables removal of the Hash Table Segment from an ELF image.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation. The sandbox is automatically bypassed when using --signing-mode PLUGIN or --encryption-mode PLUGIN.
      ▪ Added support for a new encrypt_image_data() plugin encrypter API that accepts the wrapped Data Encryption Key as a parameter, enabling usage of an ephemeral Data Encryption Key that never leaves a trusted environment such as an HSM. qbec_plugin_encrypter_example_new_encrypt_image_data.py demonstrates usage of the API.
      ▪ Fixed a bug that caused --hybrid-sign to fail silently when QTI re-signed an image, by ensuring hybrid padding is always reserved when the Security Profile supports it.
      ▪ Improved the error message displayed when OEM Metadata fields in an existing image differ from those provided during --hybrid-sign. The updated message now identifies specific differing fields by name along with their incoming and existing values.
      ▪ Fixed a bug that incorrectly mandated --certificate-chain-depth in certain signing scenarios involving --mixed-root-certificates.
      ▪ Fixed a bug that allowed --hybrid-sign to be performed on an image that had not been previously OEM signed.
fuse-blower:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation. The sandbox is automatically bypassed when using --signing-mode PLUGIN.
      ▪ Fixed a bug that caused --hybrid-sign to fail silently when QTI re-signed an image, by ensuring hybrid padding is always reserved when the Security Profile supports it.
      ▪ Improved the error message displayed when OEM Metadata fields in an existing image differ from those provided during --hybrid-sign. The updated message now identifies specific differing fields by name along with their incoming and existing values.
      ▪ Fixed a bug that incorrectly mandated --certificate-chain-depth in certain signing scenarios involving --mixed-root-certificates.
      ▪ Fixed a bug that allowed --hybrid-sign to be performed on an image that had not been previously OEM signed.
secure-debug:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation. The sandbox is automatically bypassed when using --signing-mode PLUGIN.
      ▪ Fixed a bug that caused --hybrid-sign to fail silently when QTI re-signed an image, by ensuring hybrid padding is always reserved when the Security Profile supports it.
      ▪ Improved the error message displayed when OEM Metadata fields in an existing image differ from those provided during --hybrid-sign. The updated message now identifies specific differing fields by name along with their incoming and existing values.
      ▪ Fixed a bug that incorrectly mandated --certificate-chain-depth in certain signing scenarios involving --mixed-root-certificates.
      ▪ Fixed a bug that allowed --hybrid-sign to be performed on an image that had not been previously OEM signed.
tme-secure-debug:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation. The sandbox is automatically bypassed when using --signing-mode PLUGIN.
      ▪ Fixed a bug that caused --hybrid-sign to fail silently when QTI re-signed an image, by ensuring hybrid padding is always reserved when the Security Profile supports it.
      ▪ Improved the error message displayed when OEM Metadata fields in an existing image differ from those provided during --hybrid-sign. The updated message now identifies specific differing fields by name along with their incoming and existing values.
      ▪ Fixed a bug that incorrectly mandated --certificate-chain-depth in certain signing scenarios involving --mixed-root-certificates.
      ▪ Fixed a bug that allowed --hybrid-sign to be performed on an image that had not been previously OEM signed.
elf-tool:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation.
elf-consolidator:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation.
mbn-tool:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation.
fuse-validator:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation.
tme-command:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.
      ▪ Sectools now runs within a security sandbox during operation, restricting filesystem and network access to the minimum required for the invoked operation.
profile-consolidator:
      ▪ Sectools and all companion tool binaries are now built with Python 3.14.6.

New in version 1.48:
secure-image:
      ▪ Fixed a bug preventing creation of encrypted images using multiple Security Profiles.
      ▪ Fixed a crash caused by improper resolution of the default image format when multiple Security Profiles are provided.
      ▪ Fixed a bug that prevented usage of --transfer-root when hybrid signing an image.
metabuild-secure-image:
      ▪ Fixed a bug preventing creation of encrypted images using multiple Security Profiles.
      ▪ Fixed a crash caused by improper resolution of the default image format when multiple Security Profiles are provided.
      ▪ Fixed a bug that prevented usage of --transfer-root when hybrid signing an image.
fuse-blower:
      ▪ Fixed a bug that prevented usage of --transfer-root when hybrid signing an image.
secure-debug:
      ▪ Fixed a bug that prevented usage of --transfer-root when hybrid signing an image.
tme-secure-debug:
      ▪ Fixed a crash caused by improper resolution of the default image format when multiple Security Profiles are provided.
      ▪ Fixed a bug that prevented usage of --transfer-root when hybrid signing an image.
profile-consolidator:
      ▪ Fixed a crash caused by improper resolution of the default image format when multiple Security Profiles are provided.

New in version 1.47:
secure-image:
      ▪ Fixed issue which prevented operating on a double-signed image using a Security Profile supporting OEM hybrid signing if the image was previously generated with Sectools v1.45 or older.
metabuild-secure-image
      ▪ Fixed issue which prevented operating on a double-signed image using a Security Profile supporting OEM hybrid signing if the image was previously generated with Sectools v1.45 or older.
fuse-blower:
      ▪ Fixed issue which prevented operating on a double-signed image using a Security Profile supporting OEM hybrid signing if the image was previously generated with Sectools v1.45 or older.
secure-debug:
      ▪ Fixed issue which prevented operating on a double-signed image using a Security Profile supporting OEM hybrid signing if the image was previously generated with Sectools v1.45 or older.
tme-secure-debug:
      ▪ Fixed issue which prevented operating on a double-signed image using a Security Profile supporting OEM hybrid signing if the image was previously generated with Sectools v1.45 or older.

New in version 1.46:
secure-image:
      ▪ Added support for OEM hybrid signing, which allows signing images with both a post-quantum signature algorithm and a non-post-quantum signature algorithm. Support is restricted to supported Security Profiles and image formats. New command line arguments --pad-for-hybrid-sign and --hybrid-sign were introduced for exercising hybrid signing use cases.
      ▪ Added support for providing Key Policy values via command line arguments when QBEC encrypting images with the ECDH-P384-HKDF-SIV-GCM-2 Key Management Scheme.
metabuild-secure-image
      ▪ Added support for OEM hybrid signing, which allows signing images with both a post-quantum signature algorithm and a non-post-quantum signature algorithm. Support is restricted to supported Security Profiles and image formats. New command line arguments --pad-for-hybrid-sign and --hybrid-sign were introduced for exercising hybrid signing use cases.
      ▪ Added support for providing Key Policy values via command line arguments when QBEC encrypting images with the ECDH-P384-HKDF-SIV-GCM-2 Key Management Scheme.
fuse-blower:
      ▪ Fixed a bug where using --recommended-fuses with multi-row fuses would cause the tool to crash.
      ▪ Added support for OEM hybrid signing, which allows signing images with both a post-quantum signature algorithm and a non-post-quantum signature algorithm. Support is restricted to supported Security Profiles and image formats. New command line arguments --pad-for-hybrid-sign and --hybrid-sign were introduced for exercising hybrid signing use cases.
secure-debug:
      ▪ Added support for OEM hybrid signing, which allows signing images with both a post-quantum signature algorithm and a non-post-quantum signature algorithm. Support is restricted to supported Security Profiles and image formats. New command line arguments --pad-for-hybrid-sign and --hybrid-sign were introduced for exercising hybrid signing use cases.
tme-secure-debug:
      ▪ Fixed a bug where --root-key was incorrectly mandated when using --signing-mode LOCAL and a three-level certificate chain.
      ▪ Added support for OEM hybrid signing, which allows signing images with both a post-quantum signature algorithm and a non-post-quantum signature algorithm. Support is restricted to supported Security Profiles and image formats. New command line arguments --pad-for-hybrid-sign and --hybrid-sign were introduced for exercising hybrid signing use cases.

New in version 1.45:
secure-image:
      ▪ Added support for QBEC Encryption using the ECDH-P384-HKDF-SIV-BLOCK-GCM Key Management Scheme with the ELF-BLOCK-AES-GCM Data Encryption Scheme.
      ▪ Added support for QBEC Encryption using the ECDH-P384-HKDF-SIV-CTR Key Management Scheme with the ELF-BLOCK-AES-CTR Data Encryption Scheme.
      ▪ Added new validations of the --plugin-encrypter when QBEC encrypting with --encryption-mode PLUGIN.
tme-secure-debug:
      ▪ Added support for new Runtime QAD Dump and Memory Dump debug fields.

New in version 1.44:
secure-image
      ▪ Added support for --transfer-uie-key on MBNv7 and later images, when supported by the --security-profile.
      ▪ Fixed bug where insufficient padding would be added to double-signable images capable of being signed with a Post-Quantum digital signature algorithm.
metabuild-secure-image:
      ▪ Added support for --transfer-uie-key on MBNv7 and later images, when supported by the --security-profile.
      ▪ Fixed bug where insufficient padding would be added to double-signable images capable of being signed with a Post-Quantum digital signature algorithm.

New in version 1.43:
secure-image:
      ▪ Added support for QBEC Encryption using the GCM-GCM Key Management Policy with ELF-SEGMENT-AES-GCM Data Encryption. Includes support for --encryption-mode LOCAL and --encryption-mode PLUGIN.
      ▪ Added --security-profile validation to ensure that all fuse row addresses are a multiple of 8.
      ▪ Fixed a bug in TME parser where data was easily mis-identified as TME data, resulting in high parsing times.
      ▪ Fixed a bug where Encryption Parameters were placed at an unaligned offset when the image was also signed with a post-quantum digital signature algorithm.
      ▪ Fixed a bug where the --validate operation incorrectly failed when using --fuse-blower-images that contain an MRC Hash (or PK Hash) that starts with a 0.
metabuild-secure-image:
      ▪ Added support for QBEC Encryption using the GCM-GCM Key Management Policy with ELF-SEGMENT-AES-GCM Data Encryption. Includes support for --encryption-mode LOCAL and --encryption-mode PLUGIN.
      ▪ Added --security-profile validation to ensure that all fuse row addresses are a multiple of 8.
      ▪ Fixed a bug in TME parser where data was easily mis-identified as TME data, resulting in high parsing times.
      ▪ Fixed a bug where Encryption Parameters were placed at an unaligned offset when the image was also signed with a post-quantum digital signature algorithm.
      ▪ Fixed a bug where the --validate operation incorrectly failed when using --fuse-blower-images that contain an MRC Hash (or PK Hash) that starts with a 0.
fuse-blower:
      ▪ Added --security-profile validation to ensure that all fuse row addresses are a multiple of 8.
tme-secure-debug:
      ▪ Fixed a bug in TME parser where data was easily mis-identified as TME data, resulting in high parsing times.
profile-consolidator:
      ▪ Added --security-profile validation to ensure that all fuse row addresses are a multiple of 8.

New in version 1.42:
secure-image:
      ▪ Fixed a bug where the Windows binaries would fail signing operations when run out of a directory for which the user does not have write permissions.
      ▪ Fixed a bug where the order of the IV and Auth Tags would be mis-aligned with the order of encrypted segments in a QBEC encrypted image.
metabuild-secure-image:
      ▪ Fixed a bug where the Windows binaries would fail signing operations when run out of a directory for which the user does not have write permissions.
      ▪ Fixed a bug where the order of the IV and Auth Tags would be mis-aligned with the order of encrypted segments in a QBEC encrypted image.
fuse-blower:
      ▪ Fixed a bug where the Windows binaries would fail signing operations when run out of a directory for which the user does not have write permissions.
secure-debug:
      ▪ Fixed a bug where the Windows binaries would fail signing operations when run out of a directory for which the user does not have write permissions.
tme-secure-debug:
      ▪ Fixed a bug where the Windows binaries would fail signing operations when run out of a directory for which the user does not have write permissions.

New in version 1.41:
secure-image:
      ▪ Added support for signing with the ML-DSA-65 and ML-DSA-87 post-quantum signature algorithms.
      ▪ Added support for signing with 8 or more root certificates based on the maximum defined in the provided --security-profile.
      ▪ Added logic to retry signing, rather than failing, if an ECDSA SECP384 signature containing an R or S value less than 47 bytes long, or an ECDSA SECP256 signature containing an R or S value less than 31 bytes long is generated.
      ▪ Fixed a bug where the Root Certificate Hash in the --inspect output for MRC 3.0 signed images was incorrect. MRC 3.0 image generation is not impacted, only the --inspect logic.
metabuild-secure-image:
      ▪ Added support for signing with the ML-DSA-65 and ML-DSA-87 post-quantum signature algorithms.
      ▪ Added support for signing with 8 or more root certificates based on the maximum defined in the provided --security-profile.
      ▪ Added logic to retry signing, rather than failing, if an ECDSA SECP384 signature containing an R or S value less than 47 bytes long, or an ECDSA SECP256 signature containing an R or S value less than 31 bytes long is generated.
      ▪ Fixed a bug where the Root Certificate Hash in the --inspect output for MRC 3.0 signed images was incorrect. MRC 3.0 image generation is not impacted, only the --inspect logic.
fuse-blower:
      ▪ Added support for signing with the ML-DSA-65 and ML-DSA-87 post-quantum signature algorithms.
      ▪ Added support for signing with 8 or more root certificates based on the maximum defined in the provided --security-profile.
      ▪ Added logic to retry signing, rather than failing, if an ECDSA SECP384 signature containing an R or S value less than 47 bytes long, or an ECDSA SECP256 signature containing an R or S value less than 31 bytes long is generated.
      ▪ Fixed a bug where the Root Certificate Hash in the --inspect output for MRC 3.0 signed images was incorrect. MRC 3.0 image generation is not impacted, only the --inspect logic.
secure-debug:
      ▪ Added support for signing with the ML-DSA-65 and ML-DSA-87 post-quantum signature algorithms.
      ▪ Added support for signing with 8 or more root certificates based on the maximum defined in the provided --security-profile.
      ▪ Added logic to retry signing, rather than failing, if an ECDSA SECP384 signature containing an R or S value less than 47 bytes long, or an ECDSA SECP256 signature containing an R or S value less than 31 bytes long is generated.
      ▪ Fixed a bug where the Root Certificate Hash in the --inspect output for MRC 3.0 signed images was incorrect. MRC 3.0 image generation is not impacted, only the --inspect logic.
tme-secure-debug:
      ▪ Added support for signing with the ML-DSA-65 and ML-DSA-87 post-quantum signature algorithms.
      ▪ Added support for signing with 8 or more root certificates based on the maximum defined in the provided --security-profile.
      ▪ Added logic to retry signing, rather than failing, if an ECDSA SECP384 signature containing an R or S value less than 47 bytes long, or an ECDSA SECP256 signature containing an R or S value less than 31 bytes long is generated.
      ▪ Fixed a bug where the Root Certificate Hash in the --inspect output for MRC 3.0 signed images was incorrect. MRC 3.0 image generation is not impacted, only the --inspect logic.

New in version 1.40:
secure-image:
      ▪ Added support for signing with the Dilithium3 post-quantum signature algorithm.
      ▪ Added support for MBNv8 images. Includes support for all existing features supported on MBNv7 images. Hybrid signing support to be added in the future.
metabuild-secure-image:
      ▪ Added support for signing with the Dilithium3 post-quantum signature algorithm.
      ▪ Added support for MBNv8 images. Includes support for all existing features supported on MBNv7 images. Hybrid signing support to be added in the future.
fuse-blower:
      ▪ Added support for signing with the Dilithium3 post-quantum signature algorithm.
      ▪ Added support for MBNv8 images. Includes support for all existing features supported on MBNv7 images. Hybrid signing support to be added in the future.
      ▪ Added support for blowing fuses which span two rows but are not interpreted as a byte-array.
secure-debug:
      ▪ Added support for signing with the Dilithium3 post-quantum signature algorithm.
      ▪ Added support for MBNv8 images. Includes support for all existing features supported on MBNv7 images. Hybrid signing support to be added in the future.
      ▪ Added support for new SAIL debug options, --sail-core-4-jtag-debug, --sail-core-4-traces, --sail-core-5-jtag-debug, and --sail-core-5-traces.
tme-secure-debug:
      ▪ Added support for signing with the Dilithium3 post-quantum signature algorithm.
      ▪ Added support for MBNv8 images. Includes support for all existing features supported on MBNv7 images. Hybrid signing support to be added in the future.
      ▪ Added support for the latest TME grammar version, 1.17.

New in version 1.39:
secure-image:
      ▪ Added support for generating binary compatible QBEC encrypted images.
metabuild-secure-image:
      ▪ Added support for generating binary compatible QBEC encrypted images.

New in version 1.38:
secure-image:
      ▪ Fixed a bug where the inspect output for ELF Preamble images containing a Hash Table Segment did not contain information about the Hash Table Segment.
metabuild-secure-image:
      ▪ Fixed a bug where the inspect output for ELF Preamble images containing a Hash Table Segment did not contain information about the Hash Table Segment.

New in version 1.37:
secure-image:
      ▪ Added an example plugin signer script for --signing-mode PLUGIN, plugin_signer_example.py.
      ▪ Fixed a bug where the inspect output for MRC images where multiple root certificates have the same subject/issuer line incorrectly identified one of the root certificates as a CA certificate.
tme-secure-debug:
      ▪ Added support for TME tags version 1.16.
      ▪ Added an example plugin signer script for --signing-mode PLUGIN, plugin_signer_example.py.
      ▪ Fixed a bug where the inspect output for MRC images where multiple root certificates have the same subject/issuer line incorrectly identified one of the root certificates as a CA certificate.
fuse-blower:
      ▪ Added support for new region types, BT_OEM_SECURE and WLAN_OEM_SECURE.
      ▪ Added an example plugin signer script for --signing-mode PLUGIN, plugin_signer_example.py.
      ▪ Fixed a bug where the inspect output for MRC images where multiple root certificates have the same subject/issuer line incorrectly identified one of the root certificates as a CA certificate.
metabuild-secure-image:
      ▪ Added an example plugin signer script for --signing-mode PLUGIN, plugin_signer_example.py.
secure-debug:
      ▪ Added an example plugin signer script for --signing-mode PLUGIN, plugin_signer_example.py.
      ▪ Fixed a bug where the inspect output for MRC images where multiple root certificates have the same subject/issuer line incorrectly identified one of the root certificates as a CA certificate.
mbn-tool:
      ▪ Added two new arguments, --boot-image-id and --image-dest-ptr, which allow setting the Boot Image ID and Image Destination Pointer, respectively, when generating MBNv3 images.

New in version 1.36:
secure-image:
      ▪ Added support for specifying the desired certificate chain depth via --certificate-chain-depth when using --signing-mode=TEST.
      ▪ Added the ability to block individual images from being added to MISC via the Security Profile.
      ▪ Added ability to QBEC encrypt previously hashed images.
      ▪ Refactored validation of infile when performing QBEC encryption.
tme-secure-debug:
      ▪ Added support for TME tags version 1.15.
      ▪ Added support for specifying the desired certificate chain depth via --certificate-chain-depth when using --signing-mode=TEST.
fuse-blower:
      ▪ Added support for specifying the desired certificate chain depth via --certificate-chain-depth when using --signing-mode=TEST.
metabuild-secure-image:
      ▪ Added ability to auto-detect images that can be added to MISC when performing --vouch-for and no --image-id is specified.
      ▪ Added support for specifying the desired certificate chain depth via --certificate-chain-depth when using --signing-mode=TEST.
      ▪ Added the ability to block individual images from being added to MISC via the Security Profile.
      ▪ Added ability to QBEC encrypt previously hashed images.
      ▪ Refactored validation of infile when performing QBEC encryption.
secure-debug:
      ▪ Added support for specifying the desired certificate chain depth via --certificate-chain-depth when using --signing-mode=TEST.

New in version 1.35:
secure-image:
      ▪ Added support for validating a signed image's root certificate hash against a sec.elf via  --validate and --fuse-blower-images when the root certificate hash is stored in QFPROM fuses PK_HASH, PK_HASH_0, or TME_OEM_MRC_HASH. Previously only fuses OEM_PK_HASH and MRC_HASH were supported.
fuse-blower:
      ▪ Added support for displaying FEC fuses which compute to 0 for non-zero fuse rows when performing --inspect along with --security-profile.
metabuild-secure-image:
      ▪ Added support for validating a signed image's root certificate hash against a sec.elf via  --validate and --fuse-blower-images when the root certificate hash is stored in QFPROM fuses PK_HASH, PK_HASH_0, or TME_OEM_MRC_HASH. Previously only fuses OEM_PK_HASH and MRC_HASH were supported.
mbn-tool:
      ▪ Added support for a new argument, --data-size-alignment, which will cause the data passed via --data to be padded to a multiple of the specified size.

New in version 1.34:
secure-image:
      ▪ Added support for ensuring that no short R/S values are included in the signature or certificate chain when performing the --sign operation with ECDSA secp384r1 and the provided --security-profile specifies that only R/S values of length 48 and 49 are supported.
      ▪ Added support for UIE Adata 2.0.
      ▪ Fixed bug where the --vouch-for operation could not be performed without --segment-hash-algorithm if the default segment hash algorithm for the Multi Image format used One-Shot hashing.
      ▪ Fixed bug where performing any additional operations on an image signed with MRC 3.0 would corrupt the MRC 3.0 certificate chain.
tme-secure-debug:
      ▪ Added support for ensuring that no short R/S values are included in the signature or certificate chain when performing the --sign operation with ECDSA secp384r1 and the provided --security-profile specifies that only R/S values of length 48 and 49 are supported.
      ▪ Fixed bug where performing any additional operations on an image signed with MRC 3.0 would corrupt the MRC 3.0 certificate chain. This same bug also caused the augmented --inspect output to display the wrong root certificate hashes for MRC 3.0 images.
fuse-blower:
      ▪ Added support for ensuring that no short R/S values are included in the signature or certificate chain when performing the --sign operation with ECDSA secp384r1 and the provided --security-profile specifies that only R/S values of length 48 and 49 are supported.
      ▪ Fixed bug where performing any additional operations on an image signed with MRC 3.0 would corrupt the MRC 3.0 certificate chain. This same bug also caused the augmented --inspect output to display the wrong root certificate hashes for MRC 3.0 images.
metabuild-secure-image:
      ▪ Added support for ensuring that no short R/S values are included in the signature or certificate chain when performing the --sign operation with ECDSA secp384r1 and the provided Security Profile specifies that only R/S values of length 48 and 49 are supported.
      ▪ Added support for UIE Adata 2.0.
      ▪ Fixed bug where the --vouch-for operation could not be performed without --segment-hash-algorithm if the default segment hash algorithm for the Multi Image format used One-Shot hashing.
      ▪ Fixed bug where performing any additional operations on an image signed with MRC 3.0 would corrupt the MRC 3.0 certificate chain.
secure-debug:
      ▪ Added support for ensuring that no short R/S values are included in the signature or certificate chain when performing the --sign operation with ECDSA secp384r1 and the provided --security-profile specifies that only R/S values of length 48 and 49 are supported.
      ▪ Fixed bug where performing any additional operations on an image signed with MRC 3.0 would corrupt the MRC 3.0 certificate chain. This same bug also caused the augmented --inspect output to display the wrong root certificate hashes for MRC 3.0 images.
tme-secure-debug:
      ▪ Added support for generating binary-compatible debug policies. This can be done by specifying a --security-profile for each DPR when generating multiple DPRs in a Debug Policy ELF via --new-dpr.
      ▪ Added support for ensuring that no short R/S values are included in the signature or certificate chain when performing the --sign operation with ECDSA secp384r1 and the provided --security-profile specifies that only R/S values of length 48 and 49 are supported.
      ▪ Fixed bug where performing any additional operations on an image signed with MRC 3.0 would corrupt the MRC 3.0 certificate chain. This same bug also caused the augmented --inspect output to display the wrong root certificate hashes for MRC 3.0 images.

New in version 1.33:
secure-image:
      ▪ Added support for One-Shot and ZI hashing.
      ▪ Added support for QBEC Key Management Scheme ECDH_P384_HKDF_SIV_CMAC_GCM, used for LLM QBEC encryption.
      ▪ Added support for Hash Table Segment Metadata v3.1 which allows enabling invasive JTAG debugging.
tme-secure-debug:
      ▪ Added support for One-Shot and ZI hashing.
      ▪ Added support for Hash Table Segment Metadata v3.1 which allows enabling invasive JTAG debugging.
elf-tool:
      ▪  Removed logic to automatically convert JSON representations of TME objects to binary representations prior to ELF insertion.
fuse-blower:
      ▪ Added support for One-Shot and ZI hashing.
      ▪ Added support for Hash Table Segment Metadata v3.1 which allows enabling invasive JTAG debugging.
metabuild-secure-image:
      ▪ Added support for One-Shot and ZI hashing.
      ▪ Added support for QBEC Key Management Scheme ECDH_P384_HKDF_SIV_CMAC_GCM, used for LLM QBEC encryption.
      ▪ Added support for Hash Table Segment Metadata v3.1 which allows enabling invasive JTAG debugging.
secure-debug:
      ▪ Added support for One-Shot and ZI hashing.
      ▪ Added support for Hash Table Segment Metadata v3.1 which allows enabling invasive JTAG debugging.
tme-command:
      ▪ Introduced new tool for creating SoC Terminate Request images. Run the following command for full usage details: sectools tme-command soc-terminate generate -h
tme-secure-debug:
      ▪ Added support for One-Shot and ZI hashing.
      ▪ Added support for Hash Table Segment Metadata v3.1 which allows enabling invasive JTAG debugging.

New in version 1.32:
metabuild-secure-image:
      ▪ Added support for new QBEC Key Management Scheme, ECDH_P384_HKDF_SIV_64_GCM, which allows a custom Feature ID to be set in the Encryption Parameters via --feature-id.
      ▪ Fixed bug which prevented re-signing certain double-signed images.
      ▪ Fixed bug which prevented encrypting and re-signing certain signed images.
      ▪ Fixed bug where the Program Header Table was not being placed immediately after the ELF Header in certain cases.
      ▪ Fixed bug where binary compatible images could not be generated with certain Security Profiles describing different but compatible image formats.
secure-image:
      ▪ Added support for new QBEC Key Management Scheme, ECDH_P384_HKDF_SIV_64_GCM, which allows a custom Feature ID to be set in the Encryption Parameters via --feature-id.
      ▪ Fixed bug which prevented re-signing certain double-signed images.
      ▪ Fixed bug which prevented encrypting and re-signing certain signed images.
      ▪ Fixed bug where the Program Header Table was not being placed immediately after the ELF Header in certain cases.
      ▪ Fixed bug where binary compatible images could not be generated with certain Security Profiles describing different but compatible image formats.
tme-secure-debug:
      ▪ Added support for the latest TME tag values, v1.13.

New in version 1.31:
fuse-blower:
      ▪ Added support for generating Fuse Blower Images (sec.elf or sec.dat) with fuses from the QC Spare region.
      ▪ Added support for signing using MRC 3.0. The --sign operation may now be performed using up to 6 root certificates for supporting chipsets.
metabuild-secure-image:
      ▪ Added support for encrypting using QBEC 2.0. The new argument --encryption-order may now be used to specify the order in which the --encrypt and --sign or --hash operations are to be performed on an image, for chipsets which support QBEC 2.0.
      ▪ Added support for signing using MRC 3.0. The --sign operation may now be performed using up to 6 root certificates for supporting chipsets.
secure-image:
      ▪ Added support for encrypting using QBEC 2.0. The new argument --encryption-order may now be used to specify the order in which the --encrypt and --sign or --hash operations are to be performed on an image, for supporting chipsets.
      ▪ Added support for signing using MRC 3.0. The --sign operation may now be performed using up to 6 root certificates for supporting chipsets.
secure-debug:
      ▪ Added support for signing using MRC 3.0. The --sign operation may now be performed using up to 6 root certificates for supporting chipsets.
tme-secure-debug:
      ▪ Added support for signing using MRC 3.0. The --sign operation may now be performed using up to 6 root certificates for supporting chipsets.

New in version 1.30:
metabuild-secure-image:
      ▪ Added support for including hardware context and BSVE as part of QBEC public keys.
secure-image:
      ▪ Added support for including hardware context and BSVE as part of QBEC public keys.

New in version 1.29:
fuse-blower:
      ▪ Fixed bug where multi-row fuse values, such as --fuse-mrc-hash, starting with a 0 were being set incorrectly.
